You may protect your home against silt, harsh chemicals, and unpleasant odors by installing a whole-house water filter. Because different filters remove different contaminants from water, it’s vital to shop around for the one that works best for you.
Every whole-house water filter gets rid of impurities, but some are more effective than others in softening hard water or removing rusty discoloration from well water. Whole house water filters eliminate impurities from all of your home’s water supply as it enters from the municipal system, unlike point-of-service water filters meant for use at a single faucet, say in a kitchen or bathroom.
Many people use the water treatment solutions made by well-known brands like SpringWell and Culligan daily. In this post, you will find out which water treatment brand is better overall and if Springwell vs Culligan performs better in different areas.
Springwell Vs Culligan
| Features | Springwell | Culligan |
| Images |  Editor Choice |  |
| Filtration stages | 4 | 3 |
| Installation | Easy | DIY |
| Flow rate | High | Low |
| Certification | NSF | NSF, WQA |
| Price | Expensive | Affordable |
Springwell CF1 Whole house water filtration system
Certified American components went into making the Springwell filtering system. You get everything you need to set up the product, and the shipment is on the house.
Removing the corrosion-causing deposit from the water supply before installation also increases the lifespan of household equipment and pipelines.
Our readers get 5% off at springwellwater.com – 👉 Use Code WFIQOFF
Performance
The innovative 4-stage filtering system of the Springwell whole-house water filters significantly improves water quality.
- This home water filtration system removes almost all of the chlorine and other pollutants often present in municipal water by forcing water to pass through a Kinetic Degradation Fluxion (KDF) medium.
- Coconut shell carbon is the next step in the process since it removes pollutants including chloramines, herbicides, pesticides, volatile organic compounds (VOCs), and more.
- The third stage of water filtration uses the system’s distinctive medium. It prevents water from recirculating and increases the amount of time the feed water spends in contact with the media beds.
- Stage 4’s 5-micron sediment filters out solids or visible impurities like dust, rust, clay, silt, pebbles, etc.
Contaminants removal
At each filter step, the SpringWell CF1 aims to remove a specific type of pollution:
Toxic chemicals, heavy metals, and chlorine are all targets of the KDF media.
Pesticides, herbicides, chlorine, chloramine, and volatile organic compounds (VOCs) are among the organic pollutants that the catalytic carbon medium eliminates.
The silt filter decreases the size of clay, silt, and sand.
Installations and maintenance
If you have even a basic understanding of plumbing, you should have no trouble installing the Springwell system. It comes with a full set of tools for setting up the water system.
The only upkeep it needs is a sediment filter replacement every 6 to 9 months.
Pros And Cons
Pros
- 4-stage filtration
- High filtration capacity
- 10-years lifetime
- No drop in water pressure
Cons
- Expensive
Culligan WH-HD200-C Whole House Water Filter System
Maintain a constant supply of potable water for your household with the help of the Culligan Whole-House Sediment Water Filter Housing. Reduce the accumulation of silt, grime, and sand in plumbing lines with this filtering system. In order to help keep your family healthy, the water that comes out of your kitchen, laundry room, bathroom, and outdoor faucets is clean and fresh.
This water filter is small and long-lasting. Because it stops corrosion, it also makes your pipes and household appliances last longer. Furthermore, this water filter comes with a control valve that allows you to adjust the water pressure in your entire house.
Performance
The pre-filter removes any contaminants or apparent pollutants from the supply water. The next step is to purge the feed water of any chlorine or chlorine-related impurities. The presence of chlorine in water makes it smell and taste bad.
After the first two stages of filtration, the supply water passes through an activated carbon filter, which traps and eliminates any leftover contaminants.
Installation and maintenance
The technical staff of the organization may set up the Culligan system. The filtration system is best installed, configured, and programmed by them. Furthermore, upon installation, they will check the system to make sure everything is in working order.
Due to its short lifespan, the sediment filter needs regular maintenance. But if you cleanse the filter often, it will last longer.
Contaminants removal
The water treatment systems offered by Culligan can eliminate a wide range of pollutants. Some of the most prominent ones are arsenic, germs, viruses, chlorine, pesticides, and many more.
Design
You can observe your filter in action as it captures big particles that might harm your appliances and water supply thanks to its see-through cartridge housing. When you fill-up another glass, the clarity will be much more apparent.
Certification
Culligan Water Filtration Systems are Water Quality Association (WQA) and National Sanitation Foundation (NSF) certified. You can trust it to cleanse and filter out harmful substances from your water supply.
Pros And Cons
Pros
- Inexpensive
- Easy installation
- NSF certified
- Smart features
Cons
- Low flow rate
Why should you install a whole-house water filter?
Poor Flavor of Water
A simple solution to deal with water that tastes bad is to install a water filter system in your house. A filtration system may remove chlorine, a common ingredient in water that gives it a bad taste. Furthermore, to guarantee that the water you consume is safe to drink, whole-home water filtration systems may eliminate or reduce dangerous impurities including metals, sediments, chemicals, pollutants, and microbes.
Excessive Chlorine
Reducing the amount of chlorine in your water is possible with a water filtering device. Depending on the filtering capability of your whole-house system, most can remove about 80% and others can remove up to 99%.
Cloudy water
If your water is cloudy, a whole home water filter may be able to remove sediments and other contaminants. Particles in suspension as tiny as five microns can cause water to seem cloudy. While charcoal filtration can usually remove cloudiness completely, sediment filtration can only reduce it.
Contaminants
The usage of a whole-house water filtration system can aid in the removal of substances such as chemicals and volatile organic compounds. Some of them can even eliminate heavy metals, iron, and pesticides. Untreated water can also include contaminants such as bacteria, viruses, fungi, and algae. Complete home systems also can eradicate or abolish these factors.
What Is the Optimum Cost for a Whole-House Water Filtration System?
There is a whole home water filtration system out there for any family’s budget, style, and water filtering demands. Most significantly, the quantity of purification and filtration your water requires to attain your desired quality will determine the price.
As a do-it-yourself job, you may buy and install a basic sediment filter system for your house for $50 to $100. Depending on use and water quality, these systems usually require replacement filters every six to twelve months, and the replacement cost is usually less than $40.
The purchase and installation of a multi-stage, whole-house full filtration system might run you $1,000 to $3,000 or more. These systems’ superior flow rates and greater filter capacities more than makeup for their premium price tag.
Tips for filter maintenance
Filter change
You should change your water filter every three to six months to maintain the water quality. Because water quality might affect how often you need to change it, it’s important to always follow the manufacturer’s instructions.
Maintaining a Clean housing unit
Take the housing unit from its mounting bracket and wash it in warm water every so often. By doing so, you may remove any built-up filth or rubbish.
Evaluating Pressure
Use a pressure gauge to check the inflow water pressure once a year. Aim for a pressure range of 40 to 60 psi. Get a plumber’s help if it’s not working properly.
Frequently Asked Questions
When should I replace the filter in my whole-house water system?
You should change your sediment pre-filter every three to six months, depending on your filter type. Replace the carbon filter and post-filter every twelve months.
What is the average lifespan of a whole-house water filter?
The water filtration system you select will determine this in every way. Filtration medium used in tanks has a maximum lifespan of one million gallons or ten years. In contrast, systems that rely on cartridges have a potential lifespan of twelve months.
What is the best location for the installation of a whole-house water filter system?
Most homes have their water main shutdown valves in the basement or a utility room, so that’s where you should put your whole-house water filter. Outside installation is possible for some systems.
Is it safe to consume water purified using a whole home filter?
An outstanding source of potable water is a whole-house water filter. Unlike municipal water systems, which only filter water on a big scale, whole-home water filters may remove contaminants from your drinking water. Also, when the water leaves the city’s treatment plant, whole-house filters can eliminate any toxins that may have gotten into the water.
Final Words
In a comprehensive evaluation of Springwell vs Culligan, SpringWell comes out on top in every category.
All things considered, we discovered that SpringWell’s wares were the most effective. Buying Culligan items through a local dealer is a pain compared to researching and purchasing SpringWell products. Instead of being able to educate yourself on water treatment on your own, it’s annoying that there is so little information regarding Culligan’s products available online.
The installation and use of SpringWell’s products were our favorites, and the company’s customer service was top-notch. While both SpringWell and Culligan make decent water filtration systems, SpringWell is head and shoulders above the competition.