Water Filter IQ

8 Best Bottom Loading Water Dispenser in 2020

best bottom loading water dispenser

Image result for verified checkmark Our guides are backed by data and real world testing.

Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.


To ensure you always drink clean hot and cold fresh water, you need a water dispenser in your home and office. Top loading water dispensers have gained so much popularity but they’re gradually getting replaced in most places with the bottom loading water dispensers.

Using a bottom loading water dispenser, you save yourself the stress of having to lift the large water bottles. In turn, you save time you would have spent in cleaning the floor.

Read Also:

15 Best Water Dispensers & Coolers

Top 10 Best BottlesLess Water Dispenser

There are many bottom loading water dispenser brands on the market. The purpose of this best bottom loading water dispenser is to help you make a perfect choice.

Below is the table showing the bottom loading water dispensers we are reviewing.

Here Is The List Of The Best Bottom Loading Water Dispenser With Our Expert Review:


Avalon A4BLWTRCLR Water Dispenser

If you are someone who likes multiple options when it comes to temperature settings, here is a water dispenser you might want to have. You get three well-defined temperature settings namely Cold, Cool and Hot. Each of these settings is marked by a color-coded button. The cabinet, made up of stainless steel, is not only stylish but also fits easily into a kitchen or any part of an office based setup you might want to have it in.

This water dispenser is simple to use and the user manual, which has a plethora of information in it, will clear any doubt you have regarding the functionality. After you buy it, it would not take you more than twenty minutes to set everything up. When you get the Avalon A4BLWTRCLR dispenser, you do not have to worry about any safety hazard as it comes equipped with a safety lock.

The quality of stainless steel which the water tanks are made of is very good. You also get a drain hole in the rear end of the cold water tank to flush out the water. Owing to the bottom loading design, you can load and unload the machine easily without having to put a lot of manual effort. When you open the front door, you can see the reservoir. The pump and the hose inside this reservoir lead towards the water bottle. This reservoir has the capacity to hold 3-5 gallons of water in it. If you want to fill a bottle with water, all you have to do is insert it in an upright manner in the reservoir.



Very Attractive design

It is very energy efficient

Has high-quality stainless steel build

Comes with two distinctive water tanks

Includes a child safety lock


The compressor makes a bit of noise.


Check Latest Price


Brio Self Cleaning Bottom Loading Water

If you have been looking for a water dispenser that offers a premium build but is affordable at the same time, this is a device you might want to try out. It is an ideal machine to have in a home where there are multiple people who drink water on a regular basis or other commercial establishments like a gym or an office. Those who value aesthetics should find the smooth and stylish design very appealing. The self cleaning feature ensures that you get access to filtered water at any given point without any interruption.

There are three temperature settings which enable you to get water at hot, cold and room temperature. Its nightlight feature helps you operate it even when the lights are switched off or it is very dark out there. There is no chance of you pressing the wrong button or dispensing water from the incorrect spout. It also allows you to have a good view of the drip tray and keeps you aware as to when do you need to clean it. The drip tray, which is made of plastic, can be inserted, removed and washed easily.

There are two stainless steel tanks, one dispenses hot water and the other lets out cold water. One can activate them using the two different switches placed on the rear end of the device. Like most regular water dispensers, the hot tank can hold 1 liter of water and the cold tank is capable of holding 3.6 liters. This water dispenser has been designed as a pre-assembled machine and you just need to put in minimal effort to set the whole thing together. You get a manual with eight pages which contain all the information you need to operate the device. It comes with a one year warranty.



Self-cleaning feature keeps the water sanitized

Bottle Refill Indicator lets you know when the bottle needs to be replaced

The compressor barely makes any noise


Water cannot be dispensed during self-cleaning process


Check Latest Price


hOmeLabs Bottom Loading Water with Child Safety

Those looking for an energy-efficient and high-quality water dispenser might want to invest in hOmeLabs Bottom Loading Water Dispenser. It would help you save up on a lot of money and provide you with good quality, filtered drinking water at any hour of the day. With a two-year warranty, you get a machine that offers good value for money. One of the most appealing features of this water dispenser is the ease with which it can be operated. The three temperature settings lend it versatility and make it an ideal water dispenser for both personal and commercial use.

The dispenser comes pre-assembled and all you need to do is to follow a few simple steps to set it up. One needs about eight inches of space at the rear end of the device to enable sufficient amount of air transmission towards the coils. The machine is about 40 inches long and has a narrow design to it.

While taking it for outings would be difficult, there should be no problem in installing it in the kitchen and other areas. To control the temperature settings, you get three push-buttons which have been properly labeled and can be used easily. You do not need to use any special cleaning technique to keep the dispenser running on a day-to-day basis. Observing the lights on the Bottle Refill Indicator will give you an idea as to when you need to replace the water bottle.



The LED night light enables you to dispense water in a dimly lit area

A well-designed safety lock system makes it ideal for a household filled with kids

Bottom loading design makes it easy to carry from one place to another

The hot and cold switches regulate the compressor and conserve energy


Its height makes it difficult for outdoor use

The positioning of the power cord is a bit awkward


Check Latest Price


Avalon Limited Edition Self Cleaning Water Cooler Dispenser

While the hot water reaches a temperature of 185 degrees in this dispenser, you would not have to worry about a child operating it as the child safety lock feature ensures their safety. The dispenser can accommodate bottles filled with 3 to 5 gallons of water. The water passes through the machine and goes inside the bottle. The area where the water is dispensed is 12x3x10 inches wide. You get around 9 inches of free space under the spouts where you can place the bottles.

Its self-cleaning feature requires you to just inject ozone inside it with the press of a button and the machine will clean itself. This feature ensures that different kinds of harmful elements like bacteria stay away from the dispenser. As with other dispensers, you get three temperature settings, cold, cool and hot, which give you the option to drink water at the kind of temperature you are comfortable in.

The nightlight feature helps you use the machine even when the lights are off and the empty-bottle indicator lets you know when you need to refill the bottles. The weight of the entire machine is around 42.8 pounds and if you are about to shift it to a different place, you would not have a problem with that. The dispenser adheres to all the guidelines laid down by Energy Star and is good at conserving energy. The machine operates on electricity and you do not need any batteries to run it.



Built-in nightlight is very effective in an area where there is not much light

The three temperature settings offer enough versatility

It is Energy Star approved and does a good job at conserving energy

Self-clean ozone feature keeps the device sanitized and clean


Buttons could get a little jammed after sometime

The overall build could have been better


Check Latest Price


Brio Moderna Bottom Load Hot, Cold & Room Water Cooler

If safety is your primary concern, you can try the Brio Moderna water cooler. It ensures safety not just for kids but for adults as well. You do not have to worry about accidental pouring as the water dispersion happens in two steps leaving no chance of an accident or a spill happening. When you need hot water, you just need to unlock the dispensing button. Even if you are filling up a bottle late in the night and in a room where there is minimal light, there is no risk of spilling the water as the LED nightlight will guide you all along.

You do not have to go through the ordeal of carrying heavy jugs or bottles as the machine can accommodate a 3 gallon or 5 gallon bottle or any other equipment. The self-cleaning feature ensures that you do not have to spend a lot of time or effort in maintaining the dispenser. You can get the dispenser sanitized and cleaned just at the click of a button. You just need to take care of basic hygiene. Make sure you initiate this process around the time you do not need the machine to dispense water as it will take a while for the cleaning process to complete.

A standout feature of the device is its sturdy and strong build. The stainless steel used is of very high quality and stands the test of time. The dispenser makes for a good investment as you can use it for years without facing any major issue. It is durable, long-lasting and can withstand years of heavy usage.



Its self-cleaning feature works very effectively towards eliminating germs and bacteria

The electronic display notifies you when water needs to be refilled

You can change the temperature easily and have a good customized drinking experience

Lasts for a very long time


Water cannot be dispensed during the ninety minute long self-cleaning process

Slightly difficult to wash the exterior


Check Latest Price


Avalon A3BLK Self Cleaning Bottom Loading Water Cooler Dispenser

One of the first things that will catch your attention towards this dispenser is its all-black, stainless steel design. Its overall look definitely gives it an edge over the other dispensers in this range. Apart from being a sturdy-looking machine, it is also a well-performing one. With a capacity of 5 gallons, it can cater to the drinking needs of a large family or employees working in an office space.

The bottom loading design helps you stay away from the stress or physical pain of carrying heavy bottles. There is a safety lock installed in the device which helps in ensuring that kids do not harm themselves if they happen to use it. The self-clean ozone feature cleans up the interiors of the water tank automatically and guarantees the dispersion of clean and filtered water.

The machine is Energy Star approved and does not consume excessive energy. It records an annual average consumption of around 450 watts. High electricity bills are the last thing you need to worry about when you invest in this dispenser.



You do not have to go through the process of carrying heavy jugs or bottles

Stylish metallic design adds to the interiors of the house

Sufficient for the needs of a large family

The safety lock makes it a safe device for children


Buttons are a little hard

The compressor makes some noise while running


Check Latest Price


Primo Bottom Loading Water Cooler – Hot & Cold

If your house is stuffed with too many things and there is very little space remaining for a new machine, this is the water dispenser you need. The compact Primo Bottom Loading Water Cooler comes with an attractive design and is ideal for households with limited members or one where there is a space crunch. It can get the work done easily and in no time. Its compact size enables you to carry it to different places inside the house or outside of it conveniently.

The water reservoirs are made of stainless steel and are long-lasting in nature. The drip tray can be easily removed and washed using a dishwasher. The dispenser comes with a warranty of one year and the manufacturer takes the onus of fixing all the issues that might emerge during this period free of cost. The machine also scores high on energy conservation.



Does not occupy much space and easy to carry around

Long-lasting, durable and strong

A nine-step process ensures complete purification for the device


Not suitable for larger families or commercial purpose

Limited warranty period


Check Latest Price


Primo Water Cooler – 3 Temperature Settings

The bottom loading design of this compact dispenser ensures that you neither have the burden of carrying the water bottles nor undergo any kind of difficulty in carrying this dispenser which is quite lightweight in nature. When you buy this device, you get coupons which can be redeemed at any Primo store around your area. The device is very efficient at doing what it is built to do. It offers three temperature settings and you can dispense water at the touch of a button.

The door is made of stainless steel lends a classy look to the dispenser. It has been rated highly by Energy Star and is UL certified too. If you are looking for a compact dispenser that offers a good number of features and is a good performer, then this is a device you can opt for. It also features a child safety lock to ensure that it does not create any safety issue for the children around.



Attractive design which would appeal to those who have an aesthetic sense

Despite being a relatively small dispenser, it offers three temperature settings

The child-safety lock avoids the possibility of hot water spill.

The controls are convenient to use


The compressor gets noisy at times

Primo water bottles are essential to use this cooler


Check Latest Price

Benefits of Using A Bottom Loading Water Dispenser

Like we mentioned earlier, there isn’t much difference between a top loading and a bottom loading water dispenser save for the place where the water bottle is placed. But then, a bottom loading water dispenser still has a slight edge over its top-loading counterpart.

Below. we’ve outlined some of the benefits of owning a bottom loading water dispenser.

Saves space

Arguably, this isn’t a major benefit of a bottom loading water dispenser given that top loading units also have the same characteristics. Most water dispensers in general, sport a space saving design which allows it to fit into tight corners or spaces.


Top loading water dispensers are tough to refill no doubt. It requires that you lift a five-gallon water bottle which weighs over 40 pounds. This causes back injury, especially with frequent refills although a lot of people don’t see it the same way.

Using a bottom loading water dispenser, the task of lifting heavy gallons of water is eliminated. You only have to deal with the compartment doors that cover the bottom loading areas on some units.

Easy to install

Generally, water dispensers are quite easy to install. You certainly do not need any professional to handle any installation. All it takes is to open the bottle cabinet, peel off the seal on the bottle and place the water pump cap and nozzle inside the bottle. Then you set the bottle inside the compartment and close the door.

Buying Guide: Best Bottom Loading Water Dispenser

In this section, we’ll point out a handful of things you should take into consideration before buying a bottom loading water dispenser.


The capacity of a bottom loading water dispenser simply refers to the size of the compartment that holds the water bottle. Generally, water bottles for water dispensers are usually between 3 to 5 gallons.

However, the size may not be the same. Therefore, if you have the dwarf-and-wide water bottles, then you should get a water dispenser that can accommodate the water bottle on all sides.

Proximity to a power source

Water dispensers require electricity to function, hence, it’s imperative to place it in a suitable place close to a power source. It should be placed close to a wall in a space where it doesn’t hinder movement in the home.

Self-Cleaning Function

The self-cleaning function should have been named appropriately – self-filtering would have been a more suitable name. This feature, although it’s not very important, filters the water inside the dispenser as it travels from the water bottle to the spout.

Features such as this make one bottom loading water dispenser cost slightly more than a similar spec system.


Look out for important certifications and Energy Start ratings on your chosen dispensers.

Safety Feature

The most prominent safety feature on a water dispenser is a child lock button. Don’t buy a bottom loading water dispenser that lacks a child lock button.

Drip Tray

The drip tray collects wastewater that spills when you are pouring out water from your dispenser into your cup. If your unit has no removable drip tray, then you’d have to deal with a lot of spills.

Noise Level

Manufacturers of bottom loading water dispensers don’t always include the sound level. However, they advertise it as noiseless units. Most of the units advertised as noiseless make small negligible sounds during operation.


Although the color isn’t an important factor, it is worth considering especially if you’re concerned about the interior decor of your home. Most of the units on the market are available in only two colors; black (with a stainless steel cabinet) and white.

Both colors will blend with any interior decor.

FAQs on Bottom Loading Water Dispensers

Let’s quickly debunk some rumors before we wrap up this review. Here are some frequently asked questions about bottom loading water dispensers.

Q. How Does A Bottom Loading Water Dispenser Work?

A. A bottom loading water dispenser has different parts:

  • Probe assembly – connects the water pump to the water bottle and water tanks
  • The probe hanger – keeps the assembly clean during refills
  • Pumps – pumps water into the hot and cold tanks
  • Hot and cold tanks – heat or chill clean water and holds it until you dispense the hot or cold water.

Now, let’s look at how these parts work to give you clean and fresh water.

To get your bottom loading water dispenser up and running, open the unit, press the water pump button and place the nozzle of the water pump inside the water bottle.

Then, gently slide the water bottle into the cabinet and press the hot or cold dispense button. While pressing down the hot or cold button you will hear the pump making a loud noise which is normal.

Once you install your bottom loading water dispenser and press the hot tank dispensing button. The heater heats water to the ideal temperature in approximately 20 minutes.

On the other hand, the cold water dispensing tank chills water between (37°F – 50°F) in less than one hour – that’s a pretty long time although it’s worth the wait.

Q. How to Load Water Into A Water Dispenser

A. Here’s a quick video showing how to load water into your water dispenser when water is finished in your water bottle. Given the fact that most of the bottom loading water dispensers don’t have transparent doors nor empty water bottle light indicators, you should constantly check the water level in the water bottle.

Q. Are bottom loading water dispensers better than their top-loading counterparts?

A. Well, in our opinion, the bottom loading units are better since they save you the stress of lifting up heavy water bottles. In turn, this reduces the risk of back pain.

Q. Should I buy a self-cleaning model?

A. If you’re unsure of the purity of the water from the water bottle, please get a self-cleaning model. However, if the water in your home is filtered, then buy a model that doesn’t have the self-cleaning feature.

Q. How hot is the hot water from a bottom loading water dispenser?

A. The water is hot and can cause scalding and burns. Hence, you should always opt for a bottom loading water dispenser with a hot water safety button or switch.


Bottom loading water dispensers are budget-friendly water dispensers. They are easy to use, refill, and maintain. It reduces your chances of getting back pain as a result of lifting heavy water bottles.

In the end, buying the best bottom loading water dispenser boils down to one thing; choice. Choose wisely.

Add comment